Get going - Video

First time use/Ready to go

1. Mount the wheels in the frame’s rear axle holes by pressing the black button in the centre of the wheel and then pushing the axle all the way into the axle hole. Release the push button. 

2. Check that the wheel is properly attached by pulling it sideways.

3. Mount the front wheel to the front bottom end of the frame in the same manner, i.e. press the button at the bottom of the axle and press the axle into the axel hole from underneath. Release the push button.

4. Check that the wheel is securly fastened by lifting the frame from the surface and pulling the front wheel downwards.

Adjust the height of the ­handlebar as described in Chapter «Handlebar Adjustment».

5. Unfold the rollator by pulling the handles sideways, away from each other.

6. Check that the rollator locks in walking mode; when unfolding make sure you hear a click from the telescopic stay locking into place.

7. The seat can be slid forward and backward. Push forward to obtain more walking space.